Hedgehog

Items are shown after being removed from the spruce or as a 3D computer generated picture.
The parts when shipped all come with the spruces attached and will need to be removed by the modeller.

A range of 3d printed parts and accessories to upgrade our model kits and to supply details parts and accessories for modellers.
Items in the range are from 3d printed resin and cast Britannia alloy for more delicate parts and items that require the strength of cast metal some Items are a combination of printed resin, cast metal and laser cut plastic.

NOTE;
All printed parts are supplied with all the support spruces and structures attached and must be carefully removed from the item, we can not accept any claims for damage when removing the items from the spruces.

3D PRINTED PARTS HANDLING;
Carefully remove the part spruces from the packing.
Study the parts on the spruces to identify which is the part and which is supporting spruce, ref to the ID sheet to check.
Use a razor saw to cut through the support spruces across the base plate.
Use a very sharp pair of cutters to snip off the tops of the spruces where they attach to the part.
Cut the supports level on the underside of any part.
Support marks on the item if any can be carefully removed with fine file or wet and dry paper used wet.